nice product! was a little twisted out of the box but a heat gun helped align it back up. I removed the mounting tape and went back with a wider 3m brand because the original tape didnt stick very well after a day in the sun. so I removed it re cleaned/adhesion promotor and restuck so far no issues 8/10 would recommend
Easy to install this front splitter and it looks great! Check out my install video and full reveal on YouTube at OCMotivator
Make more stuff for the new Prius please!
It took me some time to install it alone, and the seller didn't tell me where to use the long and short bolts during installation. But it looks good finally.
I was nervous about ordering but now I’m so glad I did. I decided to have a body shop install it and I really like the results. Now I need a rear defuser.
Fast shipping, the best price out there, the quality of the product is good. The double sided tape needs to be attached a little at a time to the body to support it because the material is flexible and tends to sag. The only problem I had with this kit is that the screws should have had larger heads or with washers because the pre drilled holes were too big for the screws.
I've had this stage 2.5 front lip on for about a year or more now and not only does it fit perfectly with no weird gaps but it can also take a beating and won't fall apart. I've definitely put this one through the test from scraping the bottom and smacking into pot holes not once has a piece broken off or the lip Crack. Not to say it doesn't have its blemishes from all the beatings it's taken but there has been multiple times where I truly expected a chunk to be completely gone and everytime its held like a champ! 100% recommend this front lip.
Quality is pretty good .. prepped the area with alcohol on a cotton ball before sticking then on . Need to be very careful lining them up because once the double sided tape touches the car extremely difficult to pull back off to fix … wish there was a little one for the little window closest to the back
Id give 5 stars but passenger side front visor had a dent like a punch hit it. Not bad that's why I didnt send it back but other than that they seem great!
Super easy install. Remove 10 original screws on front lower lip using 10mm socket. Install the middle portion first using tape and 4 long 10mm screws provided. Keep fitting loose for any fine tune adjustments. Then install left and right splitters using 3 x 10mm screws on each panel. Use provided tape for front part. No drilling needed. All original screw points. I didn’t like the VTEN badging in front which was easy to remove.
I ordered this product and it was shipped to me quickly and all information provided was correct. The quality of the product is good and it is very true to size for the 2015 Acura TLX. Definitely adds some aggression to the car. Definitely recommend to buy if you’re not already ordering it as you’re residing this.
Over all its a a great product and fits perfectly on the SUV. Only downside is that it’s fragile and will break. After the first wash with it on i was drying the window and with the rag in between the space and the glass it broke. I have included the picture showing where it broke. Did not take much pressure But still looks good and no issues with window rolling up or down.
There should be some instructions and some 3M tape included but after having to install it a couple times and buy some 3M tape, would have saved me alot of time. But it fits like it was made with the car